Inkjet Printers
Your all-in-one printer does not support the creation of an ad-hoc network. Instead, create the ad-hoc network on your computer, and then join the networ...
Fri, 27 Mar, 2020 at 1:48 PM
To resolve this error: Disconnect the power adapter from the printer. Wait 5 seconds to allow the printer to reset. Connect the power adapter to the pri...
Thu, 6 Aug, 2020 at 11:47 AM
To connect your all-in-one printer to your router using an IP address: Manually set the IP address to an address other than the default address within the r...
Fri, 27 Mar, 2020 at 1:48 PM
The home center window may be off the screen. Do the following to reposition the window: Do one of the following depending on which MICROSOFT WINDOWS opera...
Fri, 27 Mar, 2020 at 1:48 PM
Make sure that your all-in-one printer has a wireless connection to your computer: Open the home center software. Check the lower-left corner to verify t...
Fri, 27 Mar, 2020 at 1:48 PM
Do one of the following: Use the control panel on the printer to make copies. Connect your printer to your computer using a USB 2.0 cable and use the hom...
Thu, 20 Aug, 2020 at 2:45 PM
To prevent your pictures from printing as thumbnails when using EASYSHARE Software: Run the repair utility for KODAK EASYSHARE Software. Select Start > ...
Fri, 27 Mar, 2020 at 1:49 PM
When printing from a memory card that is inserted in the printer, images are cropped to fit the aspect ratio of the paper you have selected. Typically this ...
Thu, 20 Aug, 2020 at 2:47 PM
Turn off the printer. Disconnect the power cord from the printer. Wait five seconds, and reconnect the power cord to the printer. Turn on the printer an...
Tue, 12 May, 2020 at 11:04 AM
The ink levels shown in the printer status monitor on the computer or the display on the all-in-one printer will change incrementally, and are not a direct ...
Thu, 20 Aug, 2020 at 2:48 PM