Inkjet Printers

When would I use a static IP address?
A static IP address allows you to control the IP address of your printer. Normally you should use the DHCP (automatic) method built into all routers to con...
Fri, 27 Mar, 2020 at 2:55 PM
How do I resolve the error code 3114 "More than 1K images"?
The all-in-one printer will only display up to 999 images from a memory card. If there are more than 999 images stored on the card, those in excess of 999 wi...
Fri, 27 Mar, 2020 at 2:55 PM
How do I resolve the error message "Printer error" (error code 6203)?
To resolve this error: Disconnect the power adapter from the printer. Wait 5 seconds to allow the printer to reset. Connect the power adapter to the pri...
Wed, 27 Jan, 2021 at 11:48 AM
How do I resolve the error message "Printer error" (error code 3825)?
To resolve this error: Disconnect the power adapter from the printer. Wait 5 seconds to allow the printer to reset. Connect the power adapter to the pri...
Wed, 27 Jan, 2021 at 11:50 AM
What are the definitions of common networking terms?
Definitions of common networking terms are: IEEE 802.11 Standards Terminology 802.11b - Designates an IEEE wireless networking standard that specifies a ma...
Fri, 27 Mar, 2020 at 4:06 PM
Why can't I connect my all-in-one printer to my BELKIN Router using my IP address?
To connect your all-in-one printer to your router using an IP address: Manually set the IP address to an address other than the default address within the r...
Fri, 27 Mar, 2020 at 2:55 PM
How do I clear the print queue for my all-in-one printer?
To clear print jobs, you must have administrator rights to your computer. For WINDOWS XP or VISTA Operating Systems: Select Start > Run. Type control p...
Fri, 27 Mar, 2020 at 2:55 PM
Where can I get support for PrintProjects software and order service?
We're sorry, but this software was made by Rocketlife, and they have taken it down from their site. There is no more ability to download or get support....
Fri, 5 Mar, 2021 at 8:31 AM
My printer says it is connected, so why am I unable to ping the printer?
You may be using a higher security level setting on your firewall. Make sure the firewall is not blocking a key network communication port (ICMP). Allow inbo...
Fri, 27 Mar, 2020 at 2:55 PM
How do I adjust a picture's brightness and enlarge the picture?
To crop a picture and adjust its brightness: Open Home Center Software. Select Print and Edit, then locate and select the picture that you want to edit. ...
Tue, 12 May, 2020 at 10:49 AM