To print a test page:

  1. Load 8.5 x 11-in. plain inkjet paper in the paper tray.
  2. Do the following steps depending on which KODAK All-in-One Printer  you have:
    • ESP 3:

      1. From the control panel, press and hold Quantity + Cancel simultaneously.
      2. Wait until the On/Off light flashes.
    • ESP 5, 7 or 9:

      1. On the control panel press Menu.
      2. Select Maintenance, then press OK.
      3. Select Print Test Page, then press OK.
      4. Press Start.
    • All other printer models:

      1. On the control panel, press Home.
      2. Select Maintenance, then press OK.
      3. Select Print Test Page, then press OK.
      4. Press Start.
  3. Wait for the test page to print.
    Image


IMPORTANT: For the 5000 Series Printers, a diagnostic sheet is used instead of a test page.


To print a diagnostic sheet:

  1. Load 8.5 x 11-in. plain inkjet paper in the paper tray.
  2. Do the following steps depending on which KODAK All-in-One Printer you have:
    • 5100:

      1. Press and hold Quantity + Copy.
    • 5300 or 5500:

      1. Press the Menu button.
      2. Scroll down to Print Diagnostic Sheet.
      3. Press OK.
      4. Press Start.
  3. Wait for the test page to print.
    Image