If you have an ESP or HERO printer for instructions on installing the printhead.
To replace the printhead in your all-in-one printer:
- Make sure the printer is on.
- Lift the access door.
- Remove the black and color ink cartridges, and set them aside.
- Remove the existing printhead from the carriage by pressing the button in the upper-left corner of the carriage.
EASYSHARE 5100, 5300, and 5500 - Remove the new printhead from its bag.
- Remove the orange cap(s).
Important: Click here to watch a video for your printer.
- Install the new printhead into the carriage.
EASYSHARE 5100, 5300, and 5500 - Push firmly against the target label of the printhead until you hear a loud click.
EASYSHARE 5100, 5300, and 5500 - Insert the color ink cartridge into the printhead, and press down until you hear it click into place.
- Insert the black ink cartridge into the printhead, and press down until you hear it click into place.
- Close the access door.
- Follow the instructions on the LCD to calibrate your printer.
Important: Be sure to use KODAK Ink Cartridges. Your all-in-one printer is designed to work with KODAK Ink Cartridges. Kodak is not responsible for the compatibility or performance of either non-Kodak brand ink cartridges or refilled ink cartridges.