To create and print 3D pictures, you need:

  • a digital camera
  • a KODAK All-in-One Printer
  • Home Center Software, v6.2 or greater

NOTE: This feature is only available for supported WINDOWS Operating Systems; it is not available for MAC OS.

  1. Select a subject that has little motion; still lifes, portraits, and landscapes work best.
  2. Take one picture, then within 20 seconds, move the camera 3 inches (75 mm) to the right without changing the angle of the camera, and take a second picture.
  3. Save the pictures to your computer. 
  4. Use Home Center Software to create and print a 3D picture:
    1. Open Home Center Software.
    2. Select Create 3D Pictures.
    3. Select a source from which to display the pictures in the thumbnail area.
    4. Locate and select the two similar pictures for the 3D picture you want to create. Selected pictures display in the picture tray.
    5. Click Next.  
    6. Home Center Software automatically identifies the matching pair from the selected pictures, then create a 3D picture from the pair. Press OK to continue.
    7. Follow the instructions to print the 3D picture.
      NOTE: To experience the three-dimensional effect, wear 3D glasses with red and cyan lenses.