Kodak Shop

IMPORTANT:

• For Home Center Software v4.2 to v5.4, follow the steps below to change the firewall settings to allow these services:
• • Bonjour Service (C:\Program Files\Bonjour\mDNSResponder.exe)
  • KODAK AiO Network Discovery Service
    (C:\Program Files\Kodak\AiO\Center\EKDiscovery.exe)
  • KODAK AiO Home Center
    (C:\Program Files\Kodak\AiO\Center\AiOHomeCenter.exe)
    
• For Home Center Software v6.0 and later, you need to allow only these services (the steps and screen shots are likely different from what is described below):
• • KODAK AiO Network Discovery Service and Bonjour Service
    (C:\Program Files\Kodak\AiO\Center\EKAiOHostService.exe)
  • KODAK AiO Home Center
    (C:\Program Files\Kodak\AiO\Center\AiOHomeCenter.exe)

1. Open the MCAFEE Security Center.
   
   
   
2. Select Internet & Network.
   
   
   
3. Select Configure.
   
   
   
4. Click Advanced in the section titled Firewall Protection is enabled.
   
   
   
5. Select Program Permissions from the Home list on the left.
   
   
   
6. Click the Add Allowed Program button.
   
   
   
7. Browse to C:\Program Files\Bonjour, then select mDNSResponder.exe. Click OK.
   
   
   
8. Click the Add Allowed Program button.
   
   
   
9. Browse to C:\Program Files\Kodak\AiO\Center, then select EKDiscovery Module for AiO Printers (ekdiscovery.exe).
   
10. Click OK.
    
    
    
11. Repeat steps 8 through 10 for AiOHomeCenter.exe.
12. Verify that all the programs are added to the Program Permissions.
    
     
13. Click OK and close Security Center.